BLOCK DRAWINGS

The AnchorFast Retaining Wall is composed of a precast Foundation Footing Plate, Big Block, Facia Board and Top Cap. Along with Anchor Piles and Stainless-Steel Cable Tie Downs the system is fast, effective and easy to install.
AnchorFast
Standard AnchorFast Block
Standard AnchorFast Block
Standard Base Plate
Standard Base Plate
AnchorFast Retaining Wall – Standard Block 8’L x 3′ H x 3′ D – 7340 Lbs


– 24 Square Foot Block speeds production during construction
– Block dimensions allows for curves
– Hollow block reduces weight and provides an internal drainage system
– Crushed rock internal drainage enhances friction connection between rows of blocks
– Keyways prevent interlocking and enhance ease of installation
– High strength lifting hooks (2 top, 2 rear) for positive connection to footing plates, tying system tighter for high retaining walls
– Multiple attractive facing options available

AnchorFast Retaining Wall – Slim Block 8′ L x 1′ H x 3′ D – 2475 Lbs


– 8 Square Foot Block
– Block dimension allows for curves
– Hollow block reduces weight and provides internal drainage system
– Crushed rock internal drainage enhances friction connection between rows of blocks
– Keyways prevent interlocking and ease of installation
– Multiple attractive facing options available

 AnchorFast Retaining Wall Foundation Anchor Plate Large 93″ L x 16″/8″ H x 72″ D – 4785 Lbs

– Built In 3.5” batter for easy block stacking
– High strength lifting hooks for positive connection to blocks, tying system tighter for high retaining walls
– Slide resistant lip at the front of the plates
– Configuration minimizes embedment requirement
– Incorporates holes for short piles to anchor plates to subgrade

Short Base Plate
Short Base Plate
Typical Facia Board
Typical Facia Board
AnchorFast Retaining Wall Foundation Anchor Plate Small 93″ L x 16″/8″ H x 47 1/4″ D – 3110 Lbs


– Built in 3.5” batter for easy block stacking
– High strength lifting hooks for positive connection to blocks, tying system tighter for high retaining walls
– Slide resistant lip at the front of the plates
– Configuration minimizes embedment requirement
– Incorporates holes for short piles to anchor plates to subgrade

AnchorFast Retaining Wall Facia Board 14″ L x 71″ H x 4″ T – 392 Lbs


– Tied vertically with cable into the rear hooks of the blocks
– Provides a beautiful finish to the AnchorFast Retaining Wall
– Covers any gaps between blocks and prevents any loss of gravel during backfill
– High strength lifting hooks for positive connection between facia board and blocks
– Multiple attractive facing options available

AnchorFast Retaining Wall Top Caps 93 1/2″ L x 5″ H x 8″ D – 420 Lbs


– Provides an attractive finish to the top of the AnchorFast Retaining Wall
– Cap size allows for the installation of fencing or hedging through top of the wall drain hole
– Multiple attractive facing options available

Photo Key:
#1 Typical Cable Connection to the Back of the AnchorFast Block.
#2. Two AnchorFast Blocs Stacked on Foundation Footing Plate with Rear Anchor Pile.
#3. Excavator Assisting with Cable Tensioning (3rd & 5th Row Cable Tie Downs).”
#4. Patented AnchorFast 100 mm SCH 80 Steel Cable Connection Pipe
#5. Workers prepping the crushed gravel base before laying the Foundation Footing Plates.
#6. AnchorFast Blocks Sitting on Foundation Footing Plates with Drilled Anchor Piles. Stainless Steel Cables Being Prepped for Installation.
#7. With Foundation Footing Plates set, AnchorFast Blocks being set, followed by cable tensioning and backfill.